Submarine Gear » Horns

Klaxon “Works”

Lieberman — Sat, 12 Jun 2010 17:05:22 +0000

Everything you need to set up your own Klaxon sound – Klaxon Horn Kit, Klaxon Base and Mounting Bracket, Wiring, Rechargeable Battery, and Battery Charger. Put the whole thing together in about 20 minutes with just a few basic hand tools, and save yourself $35.00 over ordering a la carte!

Set includes:

Klaxon Horn Kit

Base and Mounting Bracket

Rechargeable battery

Battery Charger

Wiring

$199.00 for complete set

Klaxon Horn Kit

Lieberman — Sat, 05 Jun 2010 16:29:05 +0000

This baby sounds like a real diesel submarine diving alarm, but costs hundreds of dollars less! Of all the horns I’ve tested, this is the only one that sounds like the real deal. Comes with mounting hardware, 8 feet of wire with quick-disconnect terminals at one end, and a heavy-duty pushbutton switch. Install under your hood, or just about anywhere you can put a 12V battery. Overall dimensions: 9 inches long by 4-1/4 inches in diameter.

Click here to hear the actual sound. The horn is MUCH louder than the recording – I didn’t want to blow your speakers out – actual sound output is 110dB(A), certainly loud enough to act as a car horn.

If you’re not going to install in your ride, you may need a battery and/or charger, and you may want a ready-to-go mounting base. You can find them Here

$79.00 ea. – Includes horn, switch, mounting hardware, 8 feet of wiring with quick-disconnect terminals on horn end.

Klaxon Base and Mounting Bracket Set

Lieberman — Sat, 05 Jun 2010 16:28:53 +0000

OK, if you’re handyman-challenged but still want a mount for your Klaxon, here’s the ticket! A walnut base with a specially-modified bracket, accommodating the Klaxon Horn Kit and the rechargeable battery. All you need to do is (1) mount the switch on the bracket (if that’s where you want it), (2) mount and connect the horn, (3) strap the battery in place, and (4) connect the wiring harness. Only a few basic tools needed, and you can do it in about 20 minutes. All the necessary hardware is supplied. AAOOOGAAA!!!

Kit includes: Walnut base with steel bracket attached, two fender washers, mini-wiring harness, and heavy-duty tiewraps to mount battery.

(Order Horn Kit/Battery/Charger separately. Click here for view of completed assembly.)

$57.00 ea.

Battery Charger – 12V

Lieberman — Thu, 04 Mar 2010 19:26:46 +0000

If you don’t have a suitable charger for your klaxon horn battery, look no further! This small, high-tech charger is just the ticket for keeping your battery at full capacity. These chargers are new “switching” type devices which operate without the use of transformers. I.C.’s control and regulate current and voltage and automatically switch from the higher fast charge voltage to the lower float charge voltage when batteries are very close to being fully charged. At the float voltage, it is safe to leave the battery connected to the charger indefinitely, making them ideal for cyclic applications where recharge time is critical and timely charge termination cannot be counted on. These chargers ensure optimum battery performance & service life.

$39.75 ea.

Rechargeable Battery for Klaxon Horn

Lieberman — Thu, 04 Mar 2010 19:09:28 +0000

Make your klaxon horn portable! These rugged, rechargeable sealed lead-acid batteries have the capacity to operate your klaxon horn for extended periods without lugging around a car battery. 12 Volt 5 Ampere-hour design with quick-disconnect terminals and five year life expectancy! 3.5″ L x 2.75″ W x 4″ H. 4 lbs.

Price: $57.50 ea.